http://www.resin-supplies.co.uk

Optically water clear resin used widely to simulate water in vases etc, sometimes called flower setting resin.

Optically water clear resin used widely to simulate water in vases etc, sometimes called flower setting resin.

Optically water clear resin used widely to simulate water in vases etc, sometimes called flower setting resin.

Optically water clear resin used widely to simulate water in vases etc, sometimes called flower setting resin.

Optically water clear resin used widely to simulate water in vases etc, sometimes called flower setting resin.

A Clear epoxy laminating system formulated to produce clear laminates, with good UV stability, can also be used as a doming resin for clear coats on badges, pictures, canvasses, mossaics etc, easy to use, cures at ambient temperature and is self levelling.
Ideal for use with Carbon/Kevlar etc.

A Clear epoxy laminating system formulated to produce clear laminates, with good UV stability, can also be used as a doming resin for clear coats on badges, pictures, canvasses, mossaics etc, easy to use, cures at ambient temperature and is self levelling.
Ideal for use with Carbon/Kevlar etc.

A Clear epoxy laminating system formulated to produce clear laminates, with good UV stability, can also be used as a doming resin for clear coats on badges, pictures, canvasses, mossaics etc, easy to use, cures at ambient temperature and is self levelling.
Ideal for use with Carbon/Kevlar etc.

A Clear epoxy laminating system formulated to produce clear laminates, with good UV stability, can also be used as a doming resin for clear coats on badges, pictures, canvasses, mossaics etc, easy to use, cures at ambient temperature and is self levelling.
Ideal for use with Carbon/Kevlar etc.

A Clear epoxy laminating system formulated to produce clear laminates, with good UV stability, can also be used as a doming resin for clear coats on badges, pictures, canvasses, mossaics etc, easy to use, cures at ambient temperature and is self levelling.
Ideal for use with Carbon/Kevlar etc.

Clear coating or casting resin virtually no shrinkage. A tough rigid non brittle material with UV stabiliser.

Clear coating or casting resin virtually no shrinkage. A tough rigid non brittle material with UV stabiliser.

Clear coating or casting resin virtually no shrinkage. A tough rigid non brittle material with UV stabiliser.

Clear coating or casting resin virtually no shrinkage. A tough rigid non brittle material with UV stabiliser.

Clear coating or casting resin virtually no shrinkage. A tough rigid non brittle material with UV stabiliser.

General purpose epoxy lay-up resin, suitable for use with glassfibre Kevlar, Carbon fibre etc, also produce lighweight fairing putties and mineral based filler & adhesives

General purpose epoxy lay-up resin, suitable for use with glassfibre Kevlar, Carbon fibre etc, also produce lighweight fairing putties and mineral based filler & adhesives

General purpose epoxy lay-up resin, suitable for use with glassfibre Kevlar, Carbon fibre etc, also produce lighweight fairing putties and mineral based filler & adhesives

General purpose epoxy lay-up resin, suitable for use with glassfibre Kevlar, Carbon fibre etc, also produce lighweight fairing putties and mineral based filler & adhesives

General purpose epoxy lay-up resin, suitable for use with glassfibre Kevlar, Carbon fibre etc, also produce lighweight fairing putties and mineral based filler & adhesives

General purpose epoxy lay-up resin, suitable for use with glassfibre Kevlar, Carbon fibre etc, also produce lighweight fairing putties and mineral based filler & adhesives

Thixotropic resin used as final surface coat dries tack free, contains wax additive.
Available white or clear to which pigment of your colour choice can be added.

Thixotropic resin used as final surface coat dries tack free, contains wax additive.
Available white or clear to which pigment of your colour choice can be added.

Thixotropic resin used as final surface coat dries tack free, contains wax additive.
Available white or clear to which pigment of your colour choice can be added.

Fastcast polyurethane resin is ideal for use in protoype and modelling applications, having very low viscosity to get in those nooks & cranies also the ability to accept fillers to reduce cost, increase strength and hardness and reduce exotherm & shrinkage.

Mixed simply 1 to 1 by weight.

With a working time of approx 6 minutes, de-mould approx 30 minutes, full cure approx 4 hours and a shore D of approx 80 on full cure.

Fastcast polyurethane resin is ideal for use in protoype and modelling applications, having very low viscosity to get in those nooks & cranies also the ability to accept fillers to reduce cost, increase strength and hardness and reduce exotherm & shrinkage.

Mixed simply 1 to 1 by weight.

With a working time of approx 6 minutes, de-mould approx 30 minutes, full cure approx 4 hours and a shore D of approx 80 on full cure.

Fire retardent lay-up resin (Class 1)
Catalyst included.

Polyester gelcoat resin available ready pigmented white or clear which colour of your choice can be added, applied as first layer onto mould surface at approx 500g per m².
Catalyst included.

Polyester gelcoat resin available ready pigmented white or clear which colour of your choice can be added, applied as first layer onto mould surface at approx 500g per m².
Catalyst included.

Polyester gelcoat resin available ready pigmented white or clear which colour of your choice can be added, applied as first layer onto mould surface at approx 500g per m².
Catalyst included.

Gravel bonding resin can be used in a mixer or the scatter system on drives footpaths etc, long working time, additions vary slightly with aggregate sizes and porosity.

Gravel bonding resin can be used in a mixer or the scatter system on drives footpaths etc, long working time, additions vary slightly with aggregate sizes and porosity.

Gravel bonding resin can be used in a mixer or the scatter system on drives footpaths etc, long working time, additions vary slightly with aggregate sizes and porosity.

Gravel bonding resin can be used in a mixer or the scatter system on drives footpaths etc, long working time, additions vary slightly with aggregate sizes and porosity.

G-fix primer must be used to prime all concrete cemetous surfaces prior to gravel bonding.
Approx coverage is 5m² per litre.

G-fix primer must be used to prime all concrete cemetous surfaces prior to gravel bonding.
Approx coverage is 5m² per litre.

G-fix primer must be used to prime all concrete cemetous surfaces prior to gravel bonding.
Approx coverage is 5m² per litre.

Laminating resin heat & chemical resistant used for chemical tanks, petrol or diesel tanks.
Catalyst included. up to 115ºC

Laminating resin heat & chemical resistant used for chemical tanks, petrol or diesel tanks.
Catalyst included. up to 115ºC

General purpose polyester lay-up resin (Lloyds shipping approved), used in many applications  for building and repairing boats canoes car body panels etc, used widely in conjunction with chopped strand mat (CSM).
Catalyst included.

General purpose polyester lay-up resin (Lloyds shipping approved), used in many applications  for building and repairing boats canoes car body panels etc, used widely in conjunction with chopped strand mat (CSM).
Catalyst included.

General purpose polyester lay-up resin (Lloyds shipping approved), used in many applications  for building and repairing boats canoes car body panels etc, used widely in conjunction with chopped strand mat (CSM).
Catalyst included.

Ideal (low cost) for many hand lay-up applications, gel/cure times may vary.
Limited availability, NOT warranted.
Catalyst included.

SCATTER-COAT RESIN A gravel bonding system using a filled resin, laid onto suitably primed surface then gravel is sprinkled onto surface allowed to cure then excess gravel is removed.
This system is very popular on car parks, pathways, driveways, cycle paths etc.
Easy to apply, non slip, long life, very attractive appearance.
Can be applied to concrete, tarmac, wood, etc.
10kg kit is enough to cover 5m² area.

Note the kit does not include primer & gravel.

A special bulk price for 10kits or over at £71.80 each
SCATTER-COAT RESIN A gravel bonding system using a filled resin, laid onto suitably primed surface then gravel is sprinkled onto surface allowed to cure then excess gravel is removed.
This system is very popular on car parks, pathways, driveways, cycle paths etc.
Easy to apply, non slip, long life, very attractive appearance.
Can be applied to concrete, tarmac, wood, etc.
10kg kit is enough to cover 5m² area.

Note the kit does not include primer & gravel.

Cures with water clear appearance, ideal for paperweights etc, Not suitable for use in latex rubber moulds.
Catalyst included.

Additive available from the resin additives/catalysts etc section.
UV Stabilser solution 400g tin, add 2% by weight to any of our polyester resins to protect against the yellowing and degrading effects of ultra violet radiation.
400g is enough to stabilise 20kg of resin.

Cures with water clear appearance, ideal for paperweights etc, Not suitable for use in latex rubber moulds.
Catalyst included.

Additive available from the resin additives/catalysts etc section.
UV Stabilser solution 400g tin, add 2% by weight to any of our polyester resins to protect against the yellowing and degrading effects of ultra violet radiation.
400g is enough to stabilise 20kg of resin.

Cures with water clear appearance, ideal for paperweights etc, Not suitable for use in latex rubber moulds.
Catalyst included.

Additive available from the resin additives/catalysts etc section.
UV Stabilser solution 400g tin, add 2% by weight to any of our polyester resins to protect against the yellowing and degrading effects of ultra violet radiation.
400g is enough to stabilise 20kg of resin.

Can be filled with powders to increase weight and strength of finished casting. see resin additives/filler powders.
Catalyst included.

Can be filled with powders to increase weight and strength of finished casting. see resin additives/filler powders.
Catalyst included.

Can be filled with powders to increase weight and strength of finished casting. see resin additives/filler powders.
Catalyst included.

Non thixotropic roofing topcoat grey only.
Catalyst included.